Thread: Makita HP 1500 Hammer drill chuck replacement
View Single Post
Old 12-08-2008   #2 (permalink)
cmoorejack
Member
 
cmoorejack's Avatar
 
Join Date: Jul 2008
Location: Orem Utah
Posts: 508
cmoorejack is on a distinguished road
Default hp1500
Hey corky,
you can just keep trying and it should come off eventually.. it looks like there is a spot to put a thin wrench on the spindle shaft[behind the chuck] to secure it[and then smack it!]
hope this helps...
Craig
cmoorejack is offline   Reply With Quote