Tool Repair Help - eReplacementParts.com Power Tool Repair Forum - View Single Post - needing to locate a armature for a Black and decker Imapct driver

UtahAV · 10-12-2009

Hi flywelder,

I think finding any parts for your 6511 Impact Driver is going to be quite a challenge! I found a parts diagram of the tool which has hand written on it that the tool was discontinued on Nov 9th, 1970. The part number for the armature is 72320-31 but it to is discontinued and no longer available. I think your best bet is to call around to your local repair shops to see if by chance any of them still have one laying on a shelf.

Good luck and let us know how it turns out.

-UtahAV
-Mark

10-12-2009	#2 (permalink)
UtahAV Member Join Date: Aug 2009 Location: Salt Lake City, UT Posts: 285	Hi flywelder, I think finding any parts for your 6511 Impact Driver is going to be quite a challenge! I found a parts diagram of the tool which has hand written on it that the tool was discontinued on Nov 9th, 1970. The part number for the armature is 72320-31 but it to is discontinued and no longer available. I think your best bet is to call around to your local repair shops to see if by chance any of them still have one laying on a shelf. Good luck and let us know how it turns out. -UtahAV -Mark