drill

[joe peebles]

what part should be replaced when drill slips in all three speeds

[UtahAV]

Hi joe peebles,

It could be a bad transmission or clutch. If you hold the chuck and hear a grinding noise I would say transmission. If when you hold the chuck you hear clicking, like what you would normally hear from the clutch, then I would say that the clutch is the bad part.

The transmission is part #613237-00.

The Clutch would likely need replacement of parts #394545-00 and #394542-00.

All of these parts are available from ereplacementparts.com

I hope this helps with your repair!

-UtahAV
-Mark