Delta JT360

peptrade1 · 05-26-2009

I have a Delta JT360 joiner that everytime i turn it off as the motor is winding down the safety switch on my plug in kicks off. Would like to know what's up. thanks. I have a new building and the joiner is new.

Stephen Tashiro · 05-27-2009

I don't know what a safety switch on a plug is. Do you mean that you have a GFI receptacle that shuts the current off as the table saw is winding down?

peptrade1 · 05-27-2009

yes,That's what i have and none of my other tools makes this happen. I have a Delta Table saw, drill press, radial arm saw.

05-26-2009	#1 (permalink)
peptrade1 Member Join Date: May 2009 Posts: 2	Delta JT360 I have a Delta JT360 joiner that everytime i turn it off as the motor is winding down the safety switch on my plug in kicks off. Would like to know what's up. thanks. I have a new building and the joiner is new. Last edited by peptrade1; 05-26-2009 at 04:55 PM.

05-27-2009	#3 (permalink)
peptrade1 Member Join Date: May 2009 Posts: 2	Jt360 yes,That's what i have and none of my other tools makes this happen. I have a Delta Table saw, drill press, radial arm saw.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-27-2009	#2 (permalink)
Stephen Tashiro Member Join Date: Dec 2008 Location: Las Cruces NM Posts: 43	I don't know what a safety switch on a plug is. Do you mean that you have a GFI receptacle that shuts the current off as the table saw is winding down?