Porter-Cable C2006 compressor

[king_w_the_ax]

I need to replace the pressure regulating switch in my C2006, Type 4 Porter-Cable compressor. I do not want to replace it with a switch identical to the OEM switch. The original switch has a cut-in at 120psi, and a cut-out at 150psi. My tank and safety valve are both rated at 150psi so I want a switch with lower cut-in/cut-out values.
The part number for the switch which I have removed from my compressor is A05802.
Is there a switch for my compressor with lower operating values?

[cmoorejack]

Hey king,
I am not sure if there is a lower switch rating for that specific air comp..but it might be easier to just switch out the safety valve to a 165 or a 200..[the tank is actually safety rated at 300 psi..as long as your air comp shuts off at 150 and you can adjust the air out thru the regulator you should be ok...
Hope this helps..
Craig