Porter Cable C2001-WK Type 0 Cylinder cover

[enventr]

I have a Porter Cable C2001-WK Type 0 compressor that up until now has been really good, I had started hearing air leaking from behind the plastic covers and finally dissassembled the unit and found the leak is coming through from the cylinder cover. There is a tiny hole in one of the "indentions" and upon further inspection it looks deliberate. Can someone let me know if this is so. If not it's just a matter of replacing the cover and I'm off and running.

[cmoorejack]

Hey enventr,
Actually that hole is a dead end..[not sure why]..usually it is the tube seal that is the culprit..CAC-1212 or the valve plate assy..upon further inspection you should be able to determine the problem..[and the solution]
Porter Cable C2001-WK Type 0 A 1.5HP 6G PC UM 1STG 120 Compressor Parts : eReplacementParts.com
Hope this helps...
cmoorejack

[a&pjetmech]

Since parts are becoming somewhat hard to get for the Porter cable compressors.

Would like to know if there are any compatable regulators to replace the C 2002 type 3 ,6 gallon manifold?

I do not need the entire manifold all I really need is the (small valve ) that controls the air pressure by turning the regulator. Round valve with rubber seal and tip that are one piece that are now broken?

This particular part is not available through the company with out purchasing the entire manifold!
THX in advance
JM