Delta 34-444 table saw

[Trimedsys]

I have a Delta 34-444 contractor's table saw. How can I determine if it is a 1, 2, 3 or 4 as the parts list show. I can't find anything in the instruction manual or on the saw. Thanks.

[Odie]

That's a tough one. It's difficult to determine which type your model is if it is not listed on your manual or saw. My suggestion would be to compare your table saw parts to the parts diagram of each type to see which one matches best.

If you need a specific part you can cross-reference the part number of one type to the other three types. If the part number is the same then you know the part is the same in all four types of your model table saw.

If the information above does not help then you may want to call Delta to see if they can offer any assistance.

Odie

[bugme]

look for the Serial number of your unit. Then look at the first page of each part diagram.

For example Type 3 says

(for units w/serial no 90C12580 thru 95H95459)

[rfd578]

I just bought a 34-444 on craigslist. It has a vibration which seems to come from excessive play in the gear that tilts the blade, I can rattle it back and forth a millimeter or so. I also cannot find any stops for 90 and 45 degrees. Any ideas?