Dewalt DW705 type 5 stripped stud repair

[l98ycar]

I have a dw705 that has a stripped stud (101 on the parts list - the threads are damaged in the table 88 in the parts list). I would like to heli-coil the table so I can re-install the stud - are the threads in the table 3/8-16 or M10X1 (or something else). Any other thoughts on repairs would be appreciated

[cmoorejack]

Hey 198ycar,
If you can get your hands on a plastic thread gauge you can gauge your stud and then match up the appropriate heli-coil ..a local hardware store should be able to help you out if you bring in the stud and they can configure it out...
hope this is helpful..?
cmoorejack