cliff

[cliffsolari]

I have DeWalt chop saw model 205 type 4. The saw stopped working so I checked the power supply. Power is to the handle switch and to the motor. However, it still will not work. Any ideas what the problem might be? Thanks for the help.

[cmoorejack]

Hey Cliff,
If you have voltage going thru the switch and to the motor..the only things left are the brush's[make sure they are making contact] the brush holders [make sure they are pushed in all the way making contact with the field] and the field..it may have a burnt or broken connection..[assuming that the armature is ok] you can check the field on the ohm setting and check each coil winding ..
DeWALT DW705 Parts List and Diagram - Type 4 : eReplacementParts.com
hope this is helpful..
cmoorejack