DW733 planer

[mmahanes]

I thought my planer was gonna cost me a fortune to fix. The crank on the planer would only lift one side of the blades. A set screw underneath the planer that holds a sprocket to the crank pole had come loose. .25 cent for new screw and I put back the sprocket and now both sides work correctly. The schematic of the 733 only confuses you about the chain and how it works.It leaves a lot to the imagination of a layman. I hope this helps someone.

[UtahAV]

Hi mmahanes,

Thanks for the tip! I am sure it will help many folks. It is posts like this that make this forum so helpful!

Thanks!

-UtahAV
-Mark