Fence

[Anthony Bogacz]

Is there a fence available to the BS903 Band Saw?

[Mark]

Hi Anthony,

I have researched this one from every angle I can think of and here is what I have found.

Ryobi offers a rip fence which is listed for the BS902 bandsaw. It is part #880059000. Ryobi does not cross reference this fence to any other model. Comparing the tables on the BS902 to the BS903, they look almost identical. I did find one reference on a discussion forum (I can't remember which one, I looked at lots of them!) that the fence for the BS902 would work with the BS903. I cannot confirm that. The fence #880059000 is available from http://ereplacementparts.com.

I also found that Sears offers a universal fence in their Craftsman line. They claim it will fit any benchtop or stationary bandsaw.

I hope this helps!

-Mark

[Don]

Hi Guys, I experienced the same problem when I purchased my BS903, and contacted the Ryobi Service center, They were most helpful and gave me the names of local parts dealers where I could order the rip fence from the specs/BS902, and it will work as the tables are the same.The part number is 88059000 and should be around the $15.00 cdn.