Dust Collector

[Sonny]

Dust collector will not stay on when using sander. Do the collectors need to be replaced? It seems to fit tight but the air pressure pushes it off.

[MikeA]

Hi Sonny. The dust collector on your 333 sander definitely shouldn't be popping off from air pressure! Sounds like the press-fit seal that holds the collector in place is failing or broken. I would suspect that the collector adapter is faulty and needs to be replaced. Here's a link:

http://www.ereplacementparts.com/adapter-p-61417.html

[Frank]

Sonny, There are two small 'O' rings that hold the dust collector on firmly. They tend to come off when emptying the dust and if one is not watching the 'O' rings come and you do not notice it. They fit on the neck of the sander.