Chuck

[Steve]

Can a keyless chuck be installed on the 6510LVR?

[WJA]

Hi Steve,

You can replace a keyed chuck on a drill with a keyless chuck. You will need to get the correct size of chuck to fit the spindle on your drill. The most popular spindle sizes are 3/8-24 and 1/2-20. The 6510 is a 3/8 drill so it would most likely be a 3/8-24 mount. Usually the spindle size is located on the chuck, to help you identify its size. Here is a article and video demonstrating how to remove a drill chuck.

How to remove a drill chuck.

Hope this helps,
WJA