• Register
  • Help
[HOME] [MY ACCOUNT] [SITE INFO] [OUR BLOG] [REPAIR FORUM]

ELECTRICAL

Results 1 to 2 of 2

Model Numbers

  1. 09-30-2009 #1
    CHRIS ANDRADE
    anonymous is offline
    Join Date
    Jan 2011
    Posts
    0

    Default ELECTRICAL

    MY COMPRESSOR HAS BEEN RUNNING SLOWLY AND SMOKING SO I TOOK IT APART AND NOTICED QUITE A BIT OF ARCHING FROM THE BRUSHES. THE ARMATURE WAS DIRTY SO I CLEANED IT AND THE BRUSHES TOO. PUT IT BACK AND SAME AMOUNT OF ARCING?
    THERE DOESN'T SEEM TO BE ANY SHORTS OR LOOSE WIRES. IS IT POSSIBLE THAT THE ARMATURE IS BAD? WHAT ELSE SHOULD I TRY?
    Reply With Quote Reply With Quote
  2. 10-01-2009 #2
    Mark
    anonymous is offline
    Join Date
    Jan 2011
    Posts
    0

    Default

    Hi Chris,

    The arching is caused by a shorted out armature. DeWalt does not offer individual parts for the motor on this compressor. You will need to purchase the motor and pump assembly to make the repair. The motor and pump assembly is part #A16342 and is available from http://ereplacementparts.com.

    I hope this helps with your repair!

    -Mark
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Parts Breakdowns on eReplacementParts.com