wont start

[jean-francois]

Last time I used the compressor I had no problems. The following small job it would not start. I checked the power cord and plug as well as the power outlet and no problem was found. Is there a fuse somewhere on this compressor. It is a 2 gallon 10 psi compressor.

[John]

There is a fuse. To get to it, you have to remove the plastic motor cover.
You'll find a green electronic board. It's held on by 2 Phillips head screws. Remove these and it comes right off. Behind it you'll find a 2.5 amp fuse. I bought the replacement fuse at an automotive shop.