Fuel Return Line

[Phillip]

I replaced my fuel return line several times & it keeps leaking at the tank. Is it a special size? I have been getting the line from a local hardware store.

[Mark]

Hi Phillip,

Most of the fuel line used on the Ryobi trimmers is metric sizes. The line at the local hardware store is very likely a SAE size. Your best bet is to replace the lines with the Ryobi parts. You will need to order three parts to get all of the needed lines. The Fuel Return Line is part #791-181086, the Fuel Line Assembly is part #791-682039 and the Primer & Hose Assembly is part #791-683974B. All of these parts are available from http://www.ereplacementparts.com.

I hope this helps with your repair!

-Mark