Recipricating saw

[Scott]

My Porter Cable Model 735 type 2 saw works great however it will no longer lock blade in position. Quick blade change feature stills appears to function other than not locking blade.

[Mark]

Hi Scott,

It sounds like the pin that holds the blade in place has worn out. It is part #648594-00. You will also need the retainer kit which is part #884696.

We have an article and video available that will guide you through the repair. You can find the information at the following link...

http://www.ereplacementparts.com/article/2307/How_to_Replace_Porter_Cable_Recip_Saw_Chuck_Pins.h tml

I hope this helps you with your repair!

-Mark