The driver wont go back in place after nailing a nail. What do I need to do or replace?
|
|
|
|
|
roofing coil nailer rn175 |
Results 1 to 2 of 2
|
The driver wont go back in place after nailing a nail. What do I need to do or replace?
Hi David,
I would suspect the problem is the Check Seal. It is an o-ring around the cylinder that acts as a valve. It commonly will cause the problem you described. The Check Seal is part #886119 and is available from http://www.ereplacementparts.com.
I hope this helps with your repair!
-Mark