rigid compressor regulator

[Joe]

I have a leak at the pressure regulator knob on a Ridgid mini wheel barrow compressor OL50145MW. Do I have to replace the entire regulator and manifold or is there an O ring that can be replaced at the knob? The diagram shows what looks like an O ring but comes up as a label in the parts listing.

[Mark]

Hi Joe,

There are no separate parts available for the regulator. It will need to be ordered as an assembly. Item #52 is a decal. The picture we have linked to it is of the wrong decal. That will be fixed shortly.

The regulator is part #079027005042 and is available from http://www.ereplacementparts.com.

I hope this helps with your repair!

-Mark