replacement fence

[Zach]

I am looking for a whole fence assembly. Do I need to order it in parts?

[warren]

I also need a complete safety guard? All I have is the mounted bolt. Where can I locate a complete fence assembly for the type 2 34-670?

[joe]

good luck. I can't even find the locking cam that goes inside handle

[WJA]

Hi Zach

Unfortunately the complete fence that you are looking for has been discontinued by the manufacture the part number was Delta #1313268. You can try a search for that and see if you can locate one. Also you might look at the Delta 36-T30 fence and see if that will fit your saw it is a good fence system without the high cost.

Hi Warren,

It looks like the guard assembly is still available for that saw, here is a link to the part number, 34-670 guard assembly. If you need additional parts to mount the guard here is a link to the schematic on the saw, Delta 34-670 schematic.

Hi Joe,

The knob you are looking for is available. here is a link to the part number,Crank inner knob.

Hope this helps y'all
WJA