LinkBack URL
About LinkBacksI replaced the belt on my 333 random orbital sander and it still runs at very high speed and throws the sanding disc off. There seems to be no kick down to a lower speed.
|
|
|
|
|
|
Continues to run at high speed |
Results 1 to 2 of 2
|
Continues to run at high speed
I replaced the belt on my 333 random orbital sander and it still runs at very high speed and throws the sanding disc off. There seems to be no kick down to a lower speed.
Hi Tom,
Check the pad bearing, Item #11A. It may be seized, causing the sander to spin continuously. It is part #803854 and is available from http://www.ereplacementparts.com.
I hope this helps!
-Mark
Reply With Quote