B&D grass hog xp gh1000

[john wagner]

The belt seems to have slipped off of the shaft pulley. I can not seem to get the case open. I believe I have taken out all of the screws, but something is still holding it together near the button that allows you to twist the shaft.

[cmoorejack]

Hey John,
Look and see if there is a sticker going over both sides of the casing still holding it together..if so you can just remove or take a razor blade and go along the seam..also keep an eye out for extra screws or clips holding it together..good luck!
Hope this has been helpful..
Craig
Geneva Tool Repair

[Eloy Vega]

The belt seems to have slipped off of the shaft pulley. I can not seem to get the case open. I believe I have taken out all of the screws, but something is still holding it together near the button that allows you to twist the shaft.

I am in the same situation and I haven't solve the problem. can you help ?

Thanks

[carpefishus]

I have the same issue of not being able to open the case. It is held in the area of part #10.

[cglover]

There's a screw hidden under the label that shows you how to rotate the head. Peel back the label, and you'll see it.