chuck removel

[Gabe]

How do remove a keyless chuck from a 18V drill/driver
Hammerdrill?
Thanks Gabe.

[Mark]

Hi Gabe,

Replacing a drill chuck is a simple repair if you first know a couple of tricks. We have prepared an article and video that will provide you with all of the information you will need to replace your drill chuck. Your chuck will be slightly different as your drill does not have a screw retaining the chuck. Just ignore the part about removing the chuck screw and then proceed with removing the chuck. You can find the article and video at the following link...

http://www.ereplacementparts.com/article/890/Cordless_Drills_101.html

I hope this helps you with your repair!

-Mark