carburetor adjustment

[frank]

I asked how to adjust a carb after taken apart and cleaned and I guess no one knows how. what is the standard amount of turns on the needle valves to start with so I can get it started. I brought it to the table can anyone answer it this time? Frank

[ROBERT DWEN]

TO ADJUST A CARB YOU NEED THE TOOL ADJUSTER. PUSH IT ON THE SCREW MARKED L. FIRST TURN IT IN TO ITS SEAT GENTLY THEN ANT CLOCK WAYS OUT ONE TURN. THEN DO SAME WITH THE SCREW H TRY TO START SAW WARM UP ENGINE THEN ADJUST L SCREW TO IDLE FAST WITH TICKOVER SCREW AS WELL. THEN RUN ENGINE FLAT OUT AT THE SAME TIME ADJUST THE H SCREW TO GET MAX REVS YOU MAY HAVE TO DO A [2 OR 3 TIMES TO GET IT RIGHT]