Replace Housing

[Dan]

I need to replace the housing part # 286313. How do I remove the speed knob and power switch, without breaking them, to then be able to remove the damaged housing?

[Mark]

Hi Dan, Sounds like a good one!
I can walk you through this fix.. First you must remove the speed knob part#67 by slipping a flat blade screw drive under the knob and prying up slow.
The knob should slip off its shaft.. next remove the 4 screws part#44
On the housing.
Your housing should lift up and off as you should have enough slack in the power wires to turn the housing over to get access to the locks holding the power switch.
Next remove the nut and washer holding the part #61 to the housing.

Thats it Dan, Happy to Help and Happy Scroll Sawing! Mark.