SHAFT WOBBLING

[ROB]

SHAFT IS WOBBLING I'M SURE. WHAT PART HOLDS THE SHAFT FROM WOBBLING AROUND?

[WJA]

Hi Rob,
A lot of the time this type of repair can get rather expensive. When the shaft starts to have play in it it usually means there is a chance a few other parts are also worn.

You might look at the following parts on your saw and see if they are worn, the recip shaft part number, NO74353, the tube carrier part number,883098, and also look at the wobble plate part number,890819. I would guess your problem might be one or all of those parts.
Good luck,
WJA