Blade Wrenches for TS3650

[Sepp]

The wrenches were lost for my saw. I obtained two from a TS2400LS table saw and found one will fit the nut but I have nothing to hold the shaft while loosening the nut. I located/borrowed a thin 7/8 " that matches the machined surfaces on the shaft so I can change blades. Question: Are the two wrenches called out in the manual different sizes or do I need to order 2 from replacement.com. Thanks. Sepp

[WJA]

Hello Sepp,

The Ridgid TS3650 table saw does use two wrenches that are the same , but each wrench has different ends, one to hold the shaft and one to hold the blade nut. The part number for the wrench is 822384-1.

Hope this helps,
-WJA