Makita 9.5v model. 6095D

[Mike Mc]

I need to know how do you remove the keyless chuck on a model 6095D. I need to replace the adjustment ring behind chuck. Thanks for any help.

[bec98x]

open chuck all the way and look inside it. there is a screw securing the chuck. the screw is usually revearse thread. once the screw is out the chuck can be unscrewed. usually you can take a large allen wrench and tighten it in the chuck. hit the allen with a hammer to break it loose.

[Mike]

bec98 is right on about chuck removal for that Makita model, but if you need a more step-by-step help, there's a good article and video available here:

How to Remove a Drill Chuck : eReplacementParts.com