dw705 will not start

[lb2coolcool@yahoo.com]

I have a dw703 type3 and need to Know how to replace brush holder.
I also would like to know how to check the field to see if it need to be replaced.
I have a starting problem, can you help

[Dale]

Changing the brushes is really easy. You can buy them with the holders if you want. They just snap in. After you remove the end cap. Part # 147097-05 . They don't come as a set you will need two. As for the field. you will need to check it with an ohms meter. each coil should have the same ohms. For the starting problem. Could be cord, switch, brushes, armature or field. Thats the order i check them in. hope this helps.